Description
Vinxs Brake Pads are a direct-fit replacement pad pair for e-bikes running a 2-piston hydraulic disc brake caliper, including Vinxs electric bikes. Supplied as a matched pair, they share the same ~52 x 40mm pad shape and twin-prong mounting tab we see on our own Vinxs fleet in the Cool Bikes Sydney workshop — if your current pads match this shape, this is the direct replacement you need.
Key Features
- Direct-fit pad pair for 2-piston hydraulic disc brakes
- Matches the pad shape used on Vinxs electric bikes
- Twin-prong mounting tab for secure caliper fit
- Approx. 52 x 40mm pad body, 7mm thick
- Sold as a pair — 2 pads, enough for one caliper
- Brand new, unused stock
Perfect For
- Vinxs electric bike owners due for a pad replacement
- Riders whose current pads match this shape and size
- DIY riders comfortable with basic disc brake work
- Anyone wanting genuine workshop-verified replacement stock
Product Information
- Condition: Brand New
- Brake Type: Hydraulic Disc (2-Piston)
- Pack Quantity: 1 Pair (2 Pads)
- Pad Dimensions: Approx. 52 x 40mm
- Mounting Tab Width: Approx. 31mm
- Pad Thickness: Approx. 7mm
Vinxs Brake Pads Compatibility
These pads are a confirmed match for Vinxs electric bikes fitted with a 2-piston hydraulic disc brake caliper — the pad shape, dimensions and twin-prong mounting tab shown in our own fitment photos line up directly with the caliper used on our Vinxs fleet.
They may also fit other e-bikes using the same 2-piston hydraulic caliper and a similar ~52 x 40mm pad shape, but hydraulic brake hardware varies between manufacturers and even between model years — do not assume a fit based on the Vinxs name or visual similarity alone. Before ordering, compare your current pads against the shape and dimensions above, or send us a photo of your existing pads or caliper and we’ll confirm compatibility before you buy.
Not sure whether your bike uses a 2-piston caliper or a different piston count? Get in touch with our Sydney workshop and we’ll help you identify the right pad before you order. These pads aren’t position-specific — if the shape matches, they’ll suit either the front or rear caliper.
Installation Notes
Replacing disc brake pads is a routine job for anyone comfortable with basic bike mechanics, but it’s still work on a safety-critical braking component. In general: remove the wheel, slide out the retaining pin or clip, withdraw the worn pads, push the caliper pistons back, and fit the new pair the same way round before reinstalling the wheel. For a general step-by-step reference, see Park Tool’s disc brake pad removal and installation guide.
If you’ve never replaced disc brake pads before, or you’re not fully confident the job’s been done correctly, bring it in to our Sydney workshop and we’ll fit them for you.
Safety & Maintenance
Brake pads are a safety-critical component. If you’re at all unsure about fitment, pad condition, or how to bed in new pads correctly, don’t guess — contact our Sydney workshop and we can check compatibility, fit the pads for you, or talk you through bedding them in safely. Inspect your pads regularly and replace them once the friction material is visibly thin or you notice reduced stopping power, and always test your brakes at low speed in a safe area before riding normally after a pad change.
Frequently Asked Questions
Will these pads fit my Vinxs electric bike?
Yes, if your Vinxs is fitted with a 2-piston hydraulic disc brake caliper — the pad shape and dimensions shown above match our Vinxs fleet directly. If you’re unsure which caliper your bike has, send us a photo and we’ll confirm before you order.
Are these pads for the front or rear brake?
They’re not position-specific. As long as the pad shape matches your caliper, this pair will suit either the front or rear position. If you’re replacing both, you’ll need two packs.
How many pads come in this pack?
One pair — two pads, which is enough for a single caliper. It’s not a full bike set.
How often should I replace my brake pads?
There’s no fixed distance we can guarantee — wear depends heavily on rider weight, terrain, and braking style. Inspect your pads regularly and replace them once the friction material is noticeably thin or braking performance drops off.
Can I install these myself?
If you’re comfortable with basic disc brake maintenance, yes — see our installation notes above. If you’d rather not, our Sydney workshop can fit them for you.
What if I’m not sure these are the right pads for my bike?
Don’t guess on a brake component. Send us a photo of your current pads or caliper via our contact page and we’ll confirm fitment before you order.
Do these pads fit e-bikes other than Vinxs?
Possibly — any e-bike using the same 2-piston hydraulic caliper and pad shape should work, but hardware varies between brands and model years. Compare your current pads against the dimensions above, or ask us to check first.





Reviews
There are no reviews yet.