Description
The E-Bike Mirror – Handlebar Mount gives you a wide view of what’s behind you without turning your head off the road ahead. A curved arm holds the mirror head clear of your hand and grips, while a pivoting hinge lets you fine-tune the angle to suit your height and riding position, and a single-bolt clamp keeps the fitting low-profile and easy to remove if you swap it between bikes.
Key Features
Perfect For
Product Information
This handlebar mirror is built to give you a wider awareness of what’s happening behind you on the road or shared path. The curved arm positions the mirror head away from your hand and brake levers, while the pivoting hinge at the base of the mirror lets you dial in the exact angle for your riding position and height. The mirror clamps directly onto your handlebar with a single bolt, so fitting and removal only take a couple of minutes if you need to switch it between bikes.
Specifications
Overall length: 23.3cm Mirror head height: 6.2cm Arm length (hinge to clamp): 12.5cm Material: Impact-resistant composite housing Mounting: Single-bolt handlebar clamp Colour: Black Package contents: 1x mirror, mounting hardware
Compatibility
Designed to clamp onto standard round handlebars in the usual e-bike and mountain bike range (approximately 22mm–32mm). If you’re often riding in traffic, pairing this mirror with our GUB Plus 11 Phone Mount keeps your navigation and your rear view both within easy sight.
Installation Notes
Position the clamp on a clean, accessible section of handlebar, away from brake and gear levers, then tighten the mounting bolt with a hex key until firm. Adjust the hinge to angle the mirror so you can see behind you without moving your head far from the road ahead, and re-check the bolt after your first few rides as new fittings can settle.
Safety & Usage Notes
A handlebar mirror is a helpful aid, not a replacement for checking over your shoulder before changing lanes or turning — always do a physical head check as well. Keep the mirror clean for a clear reflection, and stop riding if the clamp becomes loose or the mirror no longer holds its angle.
Frequently Asked Questions
Will this fit my e-bike's handlebars?
The clamp is designed for standard round handlebars in the usual e-bike and mountain bike range. Check your handlebar diameter before ordering if you’re using an unusually oversized or undersized bar.
Can I adjust the mirror angle?
Yes, the pivoting hinge lets you angle the mirror to suit your height and riding position.
Does it replace checking over my shoulder?
No — treat it as an extra aid. Always do a physical head check before changing lanes or turning.
Is it easy to remove if I want to swap bikes?
Yes, the single-bolt clamp can be loosened and removed with a hex key in a couple of minutes.
A mirror is a riding aid only and does not replace checking over your shoulder or following local road rules. Fit and check the mirror carefully before riding, and always ride to conditions.
Reviews
There are no reviews yet.