Description
The Vinxs E-Bike Digital Display With NFC Card brings together clear ride data and secure, keyless power-up in one dashboard. Alongside the same speed, battery and ride mode readout as the standard Vinxs display, this version ships with two programmable NFC access cards and a wireless remote control, so you can switch your e-bike on with a tap instead of searching for a physical key. Every unit is bench-tested in our Sydney workshop before it leaves us, and we’re happy to fit it for you if you’d rather leave the wiring to us.
Key Features
- Tap-to-unlock NFC access using either of the two included cards — no key or fob required
- Wireless remote control included for hands-free power on/off
- Real-time speed, battery level, trip distance and ride mode display
- Suits 48V-72V e-bike display systems (check your connector — see Compatibility below)
- Bench tested in our Sydney workshop before dispatch
- Direct replacement for a worn, cracked or unresponsive OEM Vinxs display
Perfect For
- Riders who want faster, keyless power-up without digging for a key
- Upgrading from a basic display to one with smart tap access
- Replacing a lost or damaged original display, remote and card set together
- Riders who share their bike and want a spare access card on hand
- DIY fitters comfortable with basic e-bike wiring, or booking our workshop to fit it for you
Product Information
- Condition: Brand New
- Kit Contents: 1x digital display, 2x NFC access cards, 1x wireless remote control
- Material: Plastic housing
- Colour: Black
- Voltage: 48V-72V (connector type varies — see Compatibility)
Vinxs E-Bike Digital Display With NFC Card Compatibility
This display is designed for 48V-72V e-bike electrical systems using the Vinxs-style connector. In our workshop we’ve seen two connector variants on Vinxs and similar e-bike systems: a 3-pin plug used on 48V/72V setups, and a separate 2-pin plug used on some 60V systems. The plug shape and pin count need to match your current display’s connector for this to be a straight swap — they are not interchangeable.
If you’re upgrading or replacing a display on one of our Vinxs electric bikes, this is a confirmed fit. If you’re fitting it to another e-bike, or you’re not certain which connector your bike uses, send us a photo of your current display’s plug (or the loom it connects to) before ordering and we’ll confirm compatibility for you.
Installation Notes
Fitting involves disconnecting the old display’s connector from the main wiring loom and plugging this unit in — no soldering required provided the connector matches. The two NFC cards and the remote control pair with the display’s controller out of the box; once connected, hold a card near the display’s NFC zone or use the remote to power the system on and off.
If you’re not confident opening up your e-bike’s dash area or matching connectors, book it in with our Sydney workshop and we’ll fit and test it for you before you ride off.
Workshop Tips
Keep your second NFC card somewhere safe as a backup — it saves a trip back to us if the first one is misplaced. Test the remote’s range in the environment you’ll actually use it in (some metal bike storage or garage setups can shorten wireless range slightly). If your display shows a fault code or won’t power up after fitting, double-check the connector is fully seated before assuming it’s faulty — this is the most common install issue we see on these units.
Frequently Asked Questions
Will this fit my e-bike?
It’s a confirmed fit for our Vinxs electric bikes. For other e-bikes, send us a photo of your current display’s connector and we’ll check it against this unit before you order.
What’s included in the box?
One digital display, two programmable NFC access cards and one wireless remote control.
Do I still need a physical key with this display?
No — the NFC card and remote are designed to replace key-based power-up on compatible systems. If your bike currently uses a keyed ignition alongside the display, send us a photo of your setup and we can confirm how it will work together.
What if I lose both NFC cards?
Get in touch with our workshop — depending on your controller we may be able to supply and program a replacement card.
How is this different from the standard Vinxs E-Bike Digital Display?
Same display and readout, with the addition of two NFC access cards and a wireless remote for keyless power-up. If you don’t need keyless access, our standard Vinxs display covers the same ride data at a lower price.
Reviews
There are no reviews yet.